Table of Contents
Advertisement
Advanced System Use & Maintenance
These jumpers allow you to enable or disable the onboard Intel® 82574L Gigabit LAN controllers.
Set to pins 1-2 to activate the Gigabit LAN feature.
Figure 78- LAN controller
RAID configuration utility selection (3-pin RAID_SEL1)
This jumper allows you to select the RAID configuration utility to use when you create disk arrays.
Place the jumper caps over pins 1-2 if you want to use the LSI Logic Embedded SATA RAID Setup
Utility (default); otherwise, place the jumper caps to pins 2-3 to use the Intel® Rapid Storage
Technology.
Figure 79- RAID configuration utility
Force BIOS recovery setting (3-pin RECOVERY1)
This jumper allows you to quickly update or recover the BIOS settings when it becomes corrupted.
To update the BIOS:
1. Prepare a USB flash disk that contains the original or latest BIOS for the motherboard
(XXXXXX.ROM) and the BUPDATER.EXE utility.
2. Set the jumper to pins 2-3.
3. Insert the USB flash and turn on the system to update the BIOS.
4. Shut down the system.
5. Set the jumper back to pins 1-2.
6.
Turn on the system.
User Manual
Rev. 1, November 2011
ApplianceStor
50
57
Advertisement
Table of Contents
