Table of Contents
Advertisement
Hardware Installation
The AS50 server comes with a riser card bracket. You need to remove the bracket if you want to install PCI
Express x8 or x16 expansion cards.
To install a PCI Express x8 or x16 card:
Figure 26- remove expansion slot riser
Firmly hold the riser card bracket, then pull it up to detach it from the PCI Express x16 slot on the
1.
motherboard.
Figure 27- disassemble riser assembly
Place the riser card bracket on a flat and stable surface, then remove the screw from the slot bay.
2.
Figure 28- install expasion card
Install a PCI Express x8 or x16 card to the bracket as shown, then secure the card with a screw
3.
Repeat the previous steps to Install another PCI Express x8 or x16 card if needed.
4.
To reinstall the riser card bracket:
User Manual
Rev. 1, November 2011
ApplianceStor
50
23
Advertisement
Table of Contents
