Table of Contents
Advertisement
Advanced System Use & Maintenance
Figure 89- Serial General Purpose Input/Output connectors
These connectors function only when you install an RASILIENT SYSTEMS PIKE SAS RAID card.
Serial port connectors (10-1 pin COM1/COM2)
These connectors are for the serial (COM) ports. Connect the serial port module cable to one of
these connectors, then install the module to a slot opening at the back of the system chassis.
Figure 90- Serial port connectors
BMC header (BMC_FW1)
The BMC connector on the motherboard supports an RASILIENT SYSTEMS® Server
Management Board 5 Series (ASMB5).
Figure 91- BMC header
User Manual
Rev. 1, November 2011
ApplianceStor
50
64
Advertisement
Table of Contents
