Table of Contents
Advertisement
Hardware Installation
Setting the RAID item in BIOS
You must enable the RAID function in the BIOS Setup before creating RAID set(s) using SATA
HDDs. To do this:
Enter the BIOS Setup during POST.
BIOS Setup during POST.
BIOS Setup during POST.
BIOS Setup during POST.
1.
Go to the Advanced
Advanced Menu > SATA Configuration,
Advanced
Advanced
2.
Set SATA Mode
SATA Mode to [RAID Mode]
SATA Mode
SATA Mode
3.
Press <F10> to save your changes and exit the BIOS Setup.
4.
Refer to Chapter 5 for details on entering and navigating through the BIOS Setup.
User Manual
Rev. 1, November 2011
SATA Configuration, then press <Enter>.
SATA Configuration,
SATA Configuration,
ApplianceStor
50
27
Advertisement
Table of Contents
