Power Take-Off (Pto) - Operation - New Holland Workmaster 25S Operator's Manual

Power Take-Off (PTO) - Operation

DANGER
Entanglement hazard!
Make sure all people and obstructions are clear of the implement before engaging the tractor Power
Take-Off (PTO).
Failure to comply will result in death or serious injury.
Power Take-Off (PTO) operation
The PTO system is totally independent of the tractor ground speed. The following operations can be performed.
1. The tractor ground travel can be stopped without stopping the PTO.
2. Stop the PTO by disengaging the PTO clutch without stopping the tractor ground travel.
To engage the PTO perform the following.
1. Sit in the operator's seat with the seat belt latched.
2. Push the PTO switch (2) down and turn the switch to
the ON position (3).
NOTE: When the PTO is engaged the PTO indicator
light (4) will be illuminated on the instrument panel.
NOTE: Only engage the PTO when the engine is at
low idle speed. This will reduce the shock load on the
driveline of the attachment.
To disengage the PTO perform the following.
1. Push down on the PTO switch (2) and the switch will
automatically return to the OFF position (3).
NOTE: The PTO indicator light (4) will go out at this
time.
Rear PTO
1. To engage the rear PTO, place the PTO shift lever (1)
in the forward position.
NOTICE: Never change the position of the PTO shift
lever when the PTO switch is ON.
6 - WORKING OPERATIONS
6-14
D0077A
1
NHIL17CT00185AA
2
NHIL17CT00185AA
3
NHIL17CT01822AA