Transport Operations; Road Transport; Road Transport - Overview - New Holland Workmaster 25S Operator's Manual

Compact tractor, tier 4b (final)
Hide thumbs Also See for Workmaster 25S:
Table of Contents

Advertisement

5 - TRANSPORT

Road transport

Road transport - Overview

Observe the following precautions when driving the tractor.
• Watch where you are going at all times, especially at row ends, on roads, and around trees.
• Use the hazard warning lights, road lights and Slow Moving Vehicle (SMV) sign when travelling on public roads,
day or night.
• DO NOT permit anyone but the operator to ride on the tractor.
• Make sure the PTO switch is in the "OFF" position.
• If the tractor becomes stuck, back out to prevent upsetting the unit.
• Always use the drawbar for pull-type work. Do not pull from any other part of the tractor, since it may tip backward.
NOTICE: When transporting on the highway, a safety chain with tensile strength equal to the gross weight of the
implement should be connected between the tractor and the towed implement. This will control the implement in the
event the hitch pin is lost. After attaching the safety chain, check its adjustment by driving the tractor to the right
and to the left for a short distance. Readjust to tighten or loosen the chain as necessary. Safety chains and suitable
hardware are available from your NEW HOLLAND Dealer.
NOTE: Procure attaching hardware locally. Check implement assembly or the Operator's Manual for attaching hard-
ware specifications, such as bolt size and grade, chain strength, washers, lock washers, nuts, etc.
• Reduce speed before turning quickly or applying brakes.
• To make an emergency stop, depress the service brake pedals and release the Hydrostatic Transmission (HST)
pedals.
• Never apply the differential lock when turning.
• Use extreme caution and avoid hard applications of the tractor brakes when pulling heavy, towed loads at road
speeds.
• Any towed vehicle with a total weight exceeding that of the towing tractor should be equipped with brakes for safe
operation.
• Always sit in the driver's seat while starting or driving the tractor.
• Always check overhead clearance, especially when transporting the tractor.

5 - TRANSPORT OPERATIONS

OPERATIONS###_5_###
5-1

Advertisement

Table of Contents
loading

Table of Contents