Four-Wheel Drive (4Wd) Lever - New Holland Workmaster 25S Operator's Manual

3 - CONTROLS AND INSTRUMENTS

Four-Wheel Drive (4WD) lever

The location of the Four-Wheel Drive (4WD) lever (1) is in
the right-hand rear fender.
To engage the 4WD completely stop the tractor. Move the
4WD lever forward into the "4WD" position (A).
To disengage the 4WD completely stop the tractor. Move
the 4WD lever rearward into the "2WD" position (B).
NOTE: Use the 4WD when additional traction is required
while operating on loose soil, in wet, slippery conditions,
or on slopes. For normal operation on firm soil, level hard
surfaces, or when operating the tractor at high speeds,
disengage the 4WD to maximize tire and drive-line life.
1
NHIL17CT00450AA
3-28