Table of Contents
Advertisement
3 - CONTROLS AND INSTRUMENTS
Rear remote control valve - Optional
The rear remote control valve is a Dealer Installed Accessory (DIA) kit. The rear remote control valve kit allows the
installation of two 0.5 in quick disconnect hydraulic couplers (1) at the rear of the tractor. The hydraulic couplers can
be used to operate a double acting or single acting hydraulic cylinder on a rear mounted implement such as a log
splitter or dump trailer.
NOTE: The rear remote control valve DIA kit is not com-
patible if your tractor has the capability of attaching a
backhoe.
The location of the rear remote control valve operating
lever (2) is beside the operator's seat on the right-hand
side.
The rear remote control valve operating lever is self cen-
tering. Self centering means the control handle will return
to the neutral position once the lever is released.
Pull "UP" on the lever to extend a hydraulic cylinder.
Push "DOWN" on the lever to retract a hydraulic cylinder.
NOTE: After connecting a hydraulic cylinder for the first
time, cycle the cylinder several times and check the hy-
draulic fluid level of the tractor. Refill the hydraulic fluid
1
NHIL18CT00616AA
as necessary. See page 7-11 for checking and filling the
hydraulic system.
3-34
Advertisement
Table of Contents
Troubleshooting
