Pre-Delivery Report - Owner's Copy - New Holland Workmaster 25S Operator's Manual

Pre-delivery report - Owner's copy

Dealer name:
Dealer address:
Model:
Product Identification Number (PIN):
A thorough pre-delivery inspection is time well spent and can prevent unnecessary after-sale service calls.
After you complete the machine assembly, use the following checklist and operator's manual to thoroughly inspect
the unit. Follow all precautionary safety messages when servicing.
Make adjustments or corrections as required, then check the item off the list.
1. SAFETY SIGN, SHIELDS, and OPERATOR'S PLATFORM
Check all the items below to insure they care installed correctly and operating properly.
Seat Belts Installed
PTO shield installed
Slow Moving Vehicle (SMV) emblem installed
Safety decals installed
Operator presence system/safety interlock system for cranking circuit operation
Park brake operation
Hazard lights/tail lights operation
All lights operation
Operator's Manual (present)
2. FLUID LEVELS and LUBRICATION
Check and top off as necessary.
Engine oil level
Radiator coolant level
Front axle oil level
Transmission & rear axle oil level
Lubricate/grease the entire machine
Fuel level
Wipe off excess grease or oil.
3. WHEELS AND TIRES
Check and inflate tire air pressure to correct pressure. See 7-24.
Torque the wheel lug bolts to specification. See 7-19.
Front wheels toe-in, See 7-32 for correct specification, Adjust if necessary.
10 - FORMS AND DECLARATIONS
10-3