Park Brake Lever - New Holland Workmaster 25S Operator's Manual

Park brake lever

WARNING
Unexpected movement!
Always engage the parking brake and switch off the engine before exiting the machine.
Failure to comply could result in death or serious injury.
The location of the park brake lever (1) is below the in-
strument panel, to the left-hand side of the key switch.
To engage the park brake depress the service brake pedal
and pull upward on the park brake lever. Then release the
service brake pedal.
NOTE: Always engage the park brake when getting off the
tractor. If the operator does not engage the brake or the
operator leaves the seat without engaging the park brake
an alarm will sound. The alarm will continue to sound for
approximately ten seconds or until the operator engages
the park brake.
The park brake indicator (2) will illuminate on the instru-
ment panel to remind you the park brake is engaged.
To disengage the park brake firmly depress the service
brake pedal and the park brake lever will self release.
Then release the service brake pedal.
3 - CONTROLS AND INSTRUMENTS
3-18
W0209A
1
NHIL18CT00700AA
2
NHIL17CT00176FA