Transmission - Change Fluid - New Holland Workmaster 25S Operator's Manual

Transmission - Change fluid

1. Place a suitable container with a minimum capacity of
15.1 L (4.0 US gal) beneath the transmission / rear axle
drain plug (1) to catch the used oil.
2. Drain the system by removing the transmission drain
plug (1). Reinstall the plug after the oil has drained.
3. Remove the dipstick (2) and fill with M
(SAE 10W-30) hydraulic oil. The transmission is filled
to the correct level when the oil registers between the
two marks (A) on the dipstick.
NOTE: During cold weather operation the tractor hy-
draulic oil can be changed to M
T O SAE 0W-20 The M
RANSMISSION IL
H T
YDRAULIC RANSMISSION
cosity oil which has improved flow characteristics in low
temperatures and can be used year round.
Transmission fluid capacity:
• 12.5 L (3.3 US gal)
4. Install the dipstick.
NOTICE: There is a common sump for the transmission,
rear axle, and hydraulic system. Therefore, extra care
should be taken to keep the oil clean.
7 - MAINTENANCE
G
ULTI RADE
-S H
ULTI EASON YDRAULIC
ULTI
O SAE 0W-20 oil is a multi-vis-
IL
134™
-S
EASON
7-35
1
NHIL17CT01281AA
2
NHIL17CT01273AA
3
93100904