New Holland Workmaster 25S Operator's Manual page 124

Raise ROPS to upright position
1. Loosen the M6 jam nut on M6 anti-vibration bolt (4)
on the both sides of the ROPS.
2. Loosen the anti-vibration bolts on both sides.
3. Remove both the quick pins (3) from the locking pins
(2).
4. Support the upper ROPS (1), remove the locking
pins.
5. Raise the upper ROPS up and toward front of the
tractor.
6. Install the locking pins in upper position to lock the
upper ROPS in the upright position.
7. Install the quick pins.
8. Tighten the anti-vibration M6 bolts.
9. Secure the anti-vibration bolts with the M6 jam nuts.
6 - WORKING OPERATIONS
6-4
2
NHIL17CT00173AA