Product Identification Number (Pin) - New Holland Workmaster 25S Operator's Manual

Product Identification Number (PIN)

Chassis number
The Product Identification Number (PIN) plate (1) for the
chassis is located on the left-hand side of the frame, near
the left front wheel.
The numbers on the plate are important in the event your
tractor should require future service.
Engine number
The Product Identification Number (PIN) plate (2), for the
engine is located on the forward end of the valve cover.
The numbers on the plate are important in the event your
engine should require future service.
Transmission number
The Product Identification Number (PIN) plate (3), for the
transmission is located below the Power Take-Off (PTO)
shield.
The numbers on the plate are important in the event your
transmission should require future service.
Emissions plate
The emissions information plate (4) is located to the rear
of the chassis PIN plate.
The plate contains important emissions related informa-
tion.
1 - GENERAL INFORMATION
1-7
1
NHIL17CT01347AA
2
NHIL17CT01119AA
3
NHIL17CT01120AA
4
NHIL17CT01347AA