Dolmar RM-72.13 H Operator's Manual page 74

tabs (2) in their housing correctly
and pressing the lower part till it
clicks.
Charge the battery following the
battery manufacturer's instructions.
IMPORTANT
To prevent
the safety device in the electron-
ics card from cutting in, never
start the engine until the battery is
fully charged!
Follow the battery manufacturer's in-
structions regarding safe handling and disposal.
3.3 FITTING THE DASHBOARD AND STEERING WHEEL
Put the machine on a flat sur-
face and straighten the front
wheels.
Fit the caster (3) on the steering
column (2), making sure the
plug (1) is correctly fitted into
the caster seat.
EN 8
2
1
4
3
2
1
3
5
Fit the dashboard cover (5) making sure all fastenings click into their
respective housings correctly.
Fit the steering wheel (6) onto the caster (3) with all the spokes di-
rected towards the seat.
Fit the steering wheel fastening it with the screws (7) supplied, in the
indicated order.
Fit the steering wheel cover (8) clicking the three fasteners into
place.
3.4 FITTING THE BLADE
1
Fit the extension (1) onto the lever (2), po-
3
2
sitioning it so that the two grains (3) face
the rear of the machine, then tighten the
two grains (3) completely.
8
7
6
3
ENGAGEMENT LEVER
EXTENSION