Identification Of The Machine And Parts - Dolmar RM-72.13 H Operator's Manual

2. IDENTIFICATION OF THE MACHINE AND PARTS

IDENTIFICATION OF THE MACHINE
The plate located under the driver's seat has the essential data and
serial number of each machine (6).
1. Acoustic power level accord-
ing to directive 2000/14/CE
Conformity mark according to
2.
directive 2006/42/CE
3. Year of manufacture
4. Operating engine power and
speed
5. Type of machine
6. Serial number
7. Weight in kgs
8. Name and address
of Manufacturer
Type of transmission
9.
(if indicated)
10. Article Code
Write your machine's serial
number here (6)
IDENTIFICATION OF MAIN COMPONENTS
Various main components can be seen on the machine, and these
have the following functions:
11. Cutting deck: this is the guard enclosing the rotating blade.
12. Blade: this is what cuts the grass. The wings at the ends help
convey the cut grass towards the collector channel.
EN 6
8 5 4 7
L
WA
kW - /min
dB
kg
3 9 6 10 2 1
14
13. Collector channel:
this is the part con-
necting the cutting
deck to the grass-
catcher.
14. Grass-catcher: as
well as collecting the
grass cuttings, this is
also a safety element
in that it stops any
objects drawn up by
the blade from being
15
thrown outside of the machine.
15. Stone-guard or deflector: this can be fitted in place of the
grass-catcher and prevents objects drawn up by the blade from
being thrown outside of the machine.
16. Engine: this moves the blade and drives the wheels. It is fully
described in a specific booklet.
17. Battery: provides the energy for starting the engine. It is fully
described in a specific booklet.
18. Driver seat: this is where the machine operator sits. It has a
sensor for detecting the presence of the operator which is a
safety device.
19. Decals for regulations and safety: give reminders on the
main provisions for working safely, each of which is explained
in chapter 1.
20. Access hatch: gives easy access to the spark plug, the fuel
cock, and the fixing nut for the engine cover.
21. Air intake grill: helps air to flow inside the cutting deck and
prevents objects from being thrown out at the front.
16 18 20 19 17
13 12 11 21