Removing The Ocp Card - Dell EMC PowerEdge R750xs Installation And Service Manual
Hide thumbs
Also See for EMC PowerEdge R750xs:
- Reference manual (25 pages) ,
- Installation and service manual (154 pages)
Table of Contents
Advertisement
Next steps
1. Follow the procedure listed in
After working inside your
system.
Removing the OCP card
Prerequisites
1. Follow the safety guidelines listed in the
Safety
instructions.
2. Follow the procedure listed in the
Before working inside your
system.
3.
If installed, remove the expansion card
riser.
Steps
1. Open the blue latch to unlock the OCP card.
2. Push the OCP card towards the rear end of the system to disconnect from the connector on the system board.
3. Slide the OCP card out of the slot on the system.
Installing and removing system components
115
Hide quick links:
Advertisement
Table of Contents
