Installing The Expansion Card Risers - Dell EMC PowerEdge R750xs Installation And Service Manual

Figure 81. Removing the Riser 1B
Next steps
Replace the expansion card riser.

Installing the expansion card risers

Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in the Before working inside your system.
3. If removed, install the expansion cards into the expansion card risers and connect all the riser cables.
4. For Riser 1A and Riser 1B (SNAPI), remove the riser blank loosening the riser blank screw.
Steps
1. Re-connect all the riser cables to the system board.
2. Align and fasten the expansion card riser thumb screws.
90 Installing and removing system components