System Battery; Replacing The System Battery - Dell EMC PowerEdge R750xs Installation And Service Manual

Hide thumbs Also See for EMC PowerEdge R750xs:
Table of Contents

Advertisement

Next steps
1.
Install the expansion card
2. Follow the procedure listed in

System battery

This is a service technician replaceable part only.

Replacing the system battery

Prerequisites
WARNING:
There is a danger of a new battery exploding if it is incorrectly installed. Replace the battery only
with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the
manufacturer's instructions. See the Safety instructions that came with your system for more information.
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3.
Remove the expansion card
4. If applicable, disconnect the power or data cables from the expansion card(s).
Steps
1. To remove the battery:
a. Use a plastic scribe to pry out the system battery.
riser.
After working inside the
Safety
instructions.
Before working inside your
riser.
system.
system.
Installing and removing system components
117

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents