Dell EMC PowerEdge R750xs Installation And Service Manual page 118

Figure 116. Removing the system battery
CAUTION: To avoid damage to the battery connector, you must firmly support the connector while installing
or removing a battery.
2. To install a new system battery:
a. Hold the battery with the positive side facing up and slide it under the securing tabs.
b. Press the battery into the connector until it snaps into place.
Figure 117. Installing the system battery
Next steps
1. If applicable, install the expansion card riser
2. Follow the procedure listed in the
118 Installing and removing system components
and connect the cables to the expansion card(s).
After working inside your system.