Installing The Front Bezel; System Cover; Removing The System Cover - Dell EMC PowerEdge R750xs Installation And Service Manual

Next steps
Replace the front bezel.

Installing the front bezel

The procedure to install the front bezel with and without the LCD panel is the same.
Prerequisites
1. Follow the safety guidelines listed in the
2. Locate and remove the bezel key.
NOTE: The bezel key is part of the LCD bezel package.
Steps
1. Align and insert the tabs on the bezel into the slots on the system.
2. Press the bezel until the release button clicks in place.
3. Lock the front bezel.
Figure 18. Installing the front bezel with the LCD panel

System cover

Removing the system cover

Prerequisites
1. Follow the safety guidelines listed in the
2. Power off the system, and any attached peripherals.
3. Disconnect the system from the electrical outlet and peripherals.
Safety instructions.
Safety instructions.
Installing and removing system components 29