Optimize Movetimes - Data I/O PSV5000 Owner's Manual

Administrative Functions ■ Administrator Functions
2. To continue, see the CH700 on-screen Help (Teaching Locations >
Note: The PSV5000 System can have static trays or a Tray Feeder.
Teaching tray locations is the same for both.
E
Please Refer to CH700 on-screen Help. In the Help table of contents click
Browse Sequences->Create a Package File->Errors Creating the Package File.

Optimize Movetimes

After the equipment locations are taught, you can optimize the
movement of the PNP head in the work envelope. This command (Get
Movetimes) calculates programming times versus head travel time to
decide the best PNP head path, especially effective when some
programmers are not used.
To get Movetimes:
1.
Figure 38:
2.
- 70 -
1b. When the CH700 Application opens, click Start.
1c. At the Setup window, make setup selections.
1d. Click System > Gantry. A password may be required—refer to
Creating Security Profiles on page 65.
Printable list of the steps). It covers teaching workspace locations for
all media options.
RRORS
On the Gantry window, click Get Movetimes.
Click Get Movetimes to optimize head travel.
Click Yes when prompted to save positions.
Data I/O ■ 096-0465-001C