Table of Contents
Advertisement
64
12.5
Ping Targets
Ping Targets can be viewed by going to Monitor > Ping Targets. Here you can view the state (either Clear or
Alarm) for each of your configured Ping Targets. Up to 32 ping targets may be configured.
View the status of Ping Targets from the Monitor > Ping Targets menu.
12.6
SNMP Alarms
This selection provides the status of the SNMP alarms by indicating if an alarm has been triggered. Under the State
column, the status will appear in red if an alarm has been activated. The status will be displayed in green when the
alarm condition is not present.
Advertisement
Table of Contents
Need help?
Do you have a question about the CellVoice 16 and is the answer not in the manual?
Questions and answers