System Alarms; Device Access Descriptions - DPS Telecom CellVoice 16 User Manual

66
12.7

System Alarms

System alarms are not-editable, housekeeping alarms that are programmed into Cell16 . The Monitor > System
Alarms screen provides the status of the system alarms by indicating if an alarm has been triggered. Under the
State column, the status will appear in red if an alarm has been activated. The status will be displayed in green
when the alarm condition is not present.
See "Display Mapping" in the Reference Section for a complete description of system alarms.
View the status of System Alarms from the Monitor > System Alarms menu.
13

Device Access Descriptions

The Device Access options, listed in pink on the left side of the web interface, provide options for generating reports,
updating the Cell16 's firmware, and rebooting the unit. Click any of the options under Device Access to perform the
desired action.
Device Access Option
Backup Config
Read
Write
Initialize
Get Log
Purge Log
Reboot
The control menu is located in the bottom left of the web interface
Backs up the units configuration settings
Reads a configuration file from the unit
Commits all changes made in the web interface to the Cell16 's non-volatile memory
Sets the unit's configuration to factory default values
Opens the Cell16 's event log in Notepad (or another plain text editor).
Deletes the Cell16 's event log history.
Reboots the Cell16 .
Description