Table of Contents
Advertisement
(8) If you need to change the TCP/IP settings, click the transmission icon to set up the TCP/IP conditions.
Transmission Icon
The default settings for the GL450/400/350 are set as follows.
IP Address: 192.168.0.1
Subnet mask: 255.255.255.0
Port number: 8023
If you haven't changed them, use these settings.
Also, your computer's TCP/IP port setting must be set to the same segment as "192.168.0.X".
(9) Click the Start button to start upgrading when you are ready to upgrade.
GL450/400
The following message will appear on the GL450/400 display in yellow characters when the upgrade is
complete. Also the beeper will sound for 5 seconds.
"Please Turn Off the Power.
GL350.
The beeper will sound for 5 seconds when the upgrade is complete.
(10) Turn off the power to the GL450/400/350 when the above message is displayed or when the beeper
sound stops.
GL400-UM-251-9370
I have locked up."
2-4
2. UPGRADING THE FIRMWARE
Advertisement
Table of Contents
Need help?
Do you have a question about the midi LOGGER GL350 and is the answer not in the manual?
Questions and answers