10 •
750-560 [2 AO 0-10V DC 10Bit 10mA 24V]
Technical Data
2.1.1.5
Technical Data
Module Specific Data
Number of outputs
Voltage supply
Current consumption
Signal voltage
Load impedance
Resolution
Conversion time
Measuring error
Temperature coefficient
Isolation
Bit width
Dimensions (mm) W x H x L
Weight
Standards and Regulations (cf. Chapter 2.2 of the Coupler/Controller Manual)
EMC-Immunity to interference (CE)
EMC-Emission of interference (CE)
Approvals (cf. Chapter 2.2 of the Coupler/Controller Manual)
More Information
Detailed references to the approvals are listed in the document "Overview
Approvals WAGO-I/O-SYSTEM 750", which You can find on the CD ROM
ELECTRONICC Tools and Docs (Item-No.: 0888-0412-0001-0101) or in the
Internet under:
www.wago.com
/WAGO-I/O-SYSTEM 750/System Description/.
(internal)
typ.
typ.
25°C
Conformity Marking
-> Service /Downloads /Documentation
2
via Power Jumper Contacts
DC 24 V (-15 % ... +20 %)
AC 24 V (-15 % ... +10 %), 50 Hz ( -5 % ... +5 %)
16 mA
0 V ... 10 V
> 1 kΩ
10 Bit
10 ms
<± 0.2 % of the full scale value
<± 0.02 % /K of the full scale value
500 V (Field/System)
2 x 16 bits data
2 x 8 bits control/status (option)
12 x 64* x 100
* from upper edge of 35 DIN rail
ca. 55 g
acc. to EN 50082-2 (96)
acc. to EN 50081-1 (93)
WAGO-I/O-SYSTEM 750
I/O Modules