Front Bezel (Optional); Removing The Optional Front Bezel; Installing Front Bezel - Dell Storage NX3330 Owner's Manual

Front bezel (optional)

The front bezel is attached to the front side of the server and prevents accidents while removing the hard drive or when pressing the reset
or power button. The front bezel can also be locked for additional security.

Removing the optional front bezel

Prerequisites
Follow the safety guidelines listed in the Safety instructions section.
Steps
1 Locate and remove the bezel key.
NOTE: The bezel key is attached to the back of the bezel.
2 Unlock the bezel by using the key.
3 Slide the release latch up, and pull the left end of the bezel.
4 Unhook the right end, and remove the bezel.
Figure 9. Removing the optional front bezel
1 bezel lock
Related links
Safety instructions

Installing front bezel

1 Hook the right end of the bezel onto the chassis.
2 Fit the free end of the bezel onto the system.
3 Secure the bezel with the key lock.
52 Installing and removing system components
2 front bezel