Configuration Example (Txrx 4) - Keysight Technologies S8780A Getting Started Manual

Operating Tasks
Port Configuration

Configuration Example (TxRx 4)

Setting up RFIO 4 for full duplex. (See
page
Figure 5-18 Example: TxRx 4
Set up the RF Input using this menu setting or its equivalent command:
Input/Output > Input > RF Input Port > RFIO 4
Command:
:FEED:RF:PORT:INP RFIO4
Then set up the RF Output using this menu setting or its equivalent command:
Input/Output > RF Source > RF Output > RFIO 4
Command:
:FEED:RF:PORT:OUTP RFIO4
Getting Started Guide
68.)
"RF power in full duplex mode" on
75