Table of Contents
Advertisement
Test Set Operating System
Keysight Software Installed
Keysight Software Installed
The E6680A has the 5G application (Y9085EM0E) already installed. Use of the
application requires appropriate licenses. Whichever licenses were purchased
with the instrument are installed at the factory (see
page
transportable licenses). For more information, see:
http://www.keysight.com/find/E6680A
Customer Installation of Software
3rd Party software verified by Keysight
Keysight has verified that the following program is compatible with the test set
applications: Symantec AntiVirus™ Corporate Edition version 10
Installation of other 3rd party software
The E6680A platform is an open Windows environment, so you can install
non-approved software on the test set. However, installation of non-approved
software may affect test set performance. Keysight does not warrant the
performance of the test set with non-approved software installed.
If you install programs other than those that Keysight has tested, it could cause
problems with the test set's applications. If this happens, you should try
uninstalling the program that has caused the problem, or try changing the
program's configuration. If this does not correct the problem, you may have to
use the Keysight Recovery system to reinstall the test set's system software.
Installation of additional or updated Keysight software
See
92
24). Other licenses can be purchased and installed later (including
Before installing any additional programs on the test set, you should exit the
E6680A Application.
Also, you must not remove any applications or programs that are installed on the
test set when it is shipped from the factory.
"Instrument software installation" on page
"Application Licenses" on
109.
Getting Started Guide
Advertisement
Table of Contents
