Configuration Example (Tx 4, Rx 7) - Keysight Technologies S8780A Getting Started Manual

Operating Tasks
Port Configuration

Configuration Example (Tx 4, Rx 7)

Setting up RFIO 4 for transmit, RFIO 7 for receive.
Figure 5-16 Example: Tx 4, Rx 7
Set up the RF Input using this menu setting or its equivalent command:
Input/Output > Input > RF Input Port > RFIO 7
Command:
:FEED:RF:PORT:INP RFIO7
Then set up the RF Output using this menu setting or its equivalent command:
Input/Output > RF Source > RF Output > RFIO 4
Command:
:FEED:RF:PORT:OUTP RFIO4
Getting Started Guide 73