Using Accessories; Location And Mounting; Weight And Dimensions; Lifting - Keysight Technologies S8780A Getting Started Manual

Wireless device solution, featuring e6680a wireless test set
Table of Contents

Advertisement

Safety & Environmental Information

Using Accessories

Using Accessories

Only Keysight approved accessories shall be used.

Location and Mounting

Weight and Dimensions

The weight and dimensions of the E6680A are as follows:
— Weight: maximum 29.4 kg (4 TRXs installed), minimum 22.7 kg (1 TRX)
— Height: 190.4 mm
— Width: 449.9 mm
— Length: 581 mm

Lifting

As indicated by the "TWO PERSON LIFT" label, safety precautions must be
taken in lifting or carrying the instrument.
Figure 1-1 Lift warning label
Getting Started Guide
Proper ergonomics should be considered when using accessories such as a
keyboard or a mouse.
Install the instrument so that the detachable power cord is readily identifiable
and is easily reached by the operator. The detachable power cord is the
instrument disconnecting device. It disconnects the mains circuits from the
mains supply before other parts of the instrument. The front panel switch is
only a standby switch and is not a LINE switch. Alternatively, an externally
installed switch or circuit breaker (which is readily identifiable and is easily
reached by the operator) may be used as a disconnecting device.
More than one person is required to safely lift or carry this instrument.
Alternately a mechanical lift can be used to eliminate the risk of personal injury.
15

Advertisement

Table of Contents
loading

Table of Contents