Protection Of The Program (Protect) - Mitsubishi MELFA CR1D Instruction Manual

(5) Protection of the program (Protect)

1) Select the protect menu
Press the function key corresponding to the "Protect" by program list display. Display the protect screen.
If the "Protect" menu is not displayed, press and display the [FUNCTION] key
<FILE/EDIT> 1/
1 08-04-24 17:20:32 22490
2 08-04-24 14:56:08
A1 08-04-24 13:05:54
B1 08-04-24 13:05:54
RENAME DELETE
2) Setup of the protection.
The protection of the program can specify the command and data (variable value) separately.
If it sets up protection of the command, press the function key corresponding to "Command." If it sets up
protection of the data, press the function key corresponding to "Data."
<PROTECT>
NAME ( 1
DATA 123
CMD.
<PROTECT>
NAME ( 1
DATA
CMD. 123
If the function key corresponding to "ON" is pressed, it will be set up for "protecting." If the function key
corresponding to "OFF" is pressed, it will be set up for "not protecting."
<PROTECT>
1
SET COMMAND PROTECT.
123
ON
<PROTECT>
1
SET DATA PROTECT.
ON 123
20 Rem 136320
694
2208
1851
123 PRTCT CLOSE ⇒
) protect
COMMAND : OFF
DATE : OFF
CLOSE
) protect
COMMAND : OFF
DATE : OFF
CLOSE
OFF
OFF
3Explanation of operation methods
<PROTECT>
NAME ( 1 ) protect
COMMAND : OFF
DATE : OFF
DATA
CMD. 123
<PROTECT>
1
SET COMMAND PROTECT.
123
ON
<PROTECT>
1
SET DATA PROTECT.
123
ON
<PROTECT>
NAME ( 1
COMMAND : OFF
DATA
CMD. 123
Operating the program control screen 3-56
CLOSE
OFF
OFF
) protect
DATE : OFF
CLOSE
ON :protecting
OFF:not protecting