Goto *L - Mitsubishi MELFA CR1D Instruction Manual

GoTo (Go To)
[Function]
This instruction makes a program branch to the specified label step unconditionally.
[Format]
GoTo[]<Branch Destination>
[Terminology]
<Branch Destination>
[Reference Program]
:
10 GoTo *LBL
:
100 *LBL
101 Mov P1
[Explanation]
(1) If a branch destination or label does not exist, an error will occur during execution.
Describe the label name.
' Branches to the label *LBL.
Detailed explanation of command words 4-204
4MELFA-BASIC IV