Operation Of The Initial-Setting Screen; Set The Display Language - Mitsubishi MELFA CR1D Instruction Manual

3Explanation of operation methods

3.17 Operation of the initial-setting screen

There is the function of initial setting shown in the following.
(1)Setup of the display language The character displayed on the T/B can be set to either Japanese or
(2)Adjustment of contrast ............. The brightness of the screen of T/B can be adjusted in the 16 steps.
Operate this operation on the initial-setting screen displayed at turning on the control power in the condition of
pushing both of [F1] key and [F3] key of T/B.

(1) Set the display language

The character displayed on the T/B can be set to either Japanese or English.
1) Press the [F1] key in the initial-setting screen, and select "1.Configuration"
1.Configuration
2.Com.Information
<1> <2>
2) Press the [F1] key , and select "1.Default Language"
1.Default Language
2.Contrast
<1> <2>
3) Display the "JPN" by [F1] or [F2] key, then language is set as Japanese. And, display the "ENG" , then
language is set as English.
<Default Language>
001
ENG
<UP> <DWN>
Operation of the initial-setting screen
3-83
English.
<1>：[F1]
1.Configuration
<2>：[F2]キ
2.Com.Information
<1> <2>
Rset
Next
Japanese
English
Back
1.Default Language
2.Contrast
<1> <2>
<Default Language>
001
ENG
<UP> <DWN>
<Default Language>
002
JPN
<UP> <DWN>
<Default Language>
001
ENG
<UP> <DWN>
[EXE]
Rset
Next
Back
Back
Back