6.2) Installation Notes ® 1. With new applications, an ElectroLynx door harness with 8 and 4 pin connectors will be pre- installed inside door by ASSA ABLOY door manufacturer when specified during ordering process. ® 2. Wiring to pigtail harness is per facility wiring requirement. ElectroLynx connector terminations and wire colors all match.
Page 15
1. ElectroLynx System Wiring Instructions (refer to Fig. 1 and Fig. 2) ® a. Look for the mating part on ASSA ABLOY doors and frames. Then plug in all connectors as shown in Fig. 2 during product installation. b. Hard wire DPS switch as shown.
Page 17
® ElectroLynx System Wiring Instructions (refer to Fig. 1 and Fig. 3) a. Look for the mating part on ASSA ABLOY doors and frames. Then plug in all connectors as shown in Fig. 3 during product installation. b. Hard wire 784 power supply as shown.
Page 19
® 1. ElectroLynx System Wiring Instructions (refer to Fig. 1 and Fig. 4) a. Look for the mating part on ASSA ABLOY doors and frames. Then plug in all connectors as shown in Fig. 4 during product installation. b. Hard wire forced/propped, hard power and/or remote unlock (REX) as shown.
Need help?
Do you have a question about the Corbin Russwin Access 800 Series and is the answer not in the manual?
Questions and answers