Adjusting The Replenishment Pump - Kodak X-Omat 2000 PROCESSOR Installation Instructions Manual

Film Size Processed
Only roll films 35 cm wide
Only 35 x 35 cm film
Average size intermix film
Only 35 x 43 cm film
* If sensitometry does not stay within control limits, flooded replenishment may be needed. Order and install
FLOODED REPLENISHMENT KIT 419779.
Note
For more information and for new recommended processing instructions, see SERVICE BULLETIN 30, Pub. No.
632661.

Adjusting the REPLENISHMENT PUMP

BRACKET
2 SCREWS
7C8771 – 04DEC98
Average Amount of Film
Use Condition PROCESSOR Operation
High 105 Linear feet or more
Medium 35 - 105 linear feet
Low 35 linear feet or less*
High 90 sheets or more
Medium 30 - 90 sheets
Low 30 sheets or less*
High 115 sheets or more
Medium 40 - 115 sheets
Low 40 sheets or less*
High 75 sheets or more
Medium 25 - 75 sheets
Low 25 sheets or less*
TOP COVER
PUMP COVER
H172_1028ACA
H172_1028AC
Setup and Checkout of the PROCESSOR
per 8 Hours of
[1] Remove:
• TOP COVER
• RECEIVING BIN
• 2 SCREWS
• PUMP COVER
Replenishment Flow Rate,
mL per 35 x 43 cm
34 seconds for Standard Cycle
25 seconds for Rapid Cycle
Developer Fixer
50
65
80 100
50
65
80 100
50
65
80 100
60
80 100
100 120
70
85
70
85
70
85
85
31