Leveling The Processor - Kodak X-Omat 2000 PROCESSOR Installation Instructions Manual

INSTALLATION INSTRUCTIONS

Leveling the PROCESSOR

FLOOR
PLATE (4)
H172_1020ACA
H172_1020AC
14
The PROCESSOR weight is 90 kg (200 lb).
[1] Move the PROCESSOR to position at the site.
[2] If the PROCESSOR is installed on a BASE or
LEVELING
SCREW (4)
[3] Install 4 FLOOR PLATES under the LEVELING
2.5 cm
(1.00 in.)
[4] Level the PROCESSOR using the LEVELING
[5] Install the 2 HOOK BOLTS around the front
[6] Install on the 2 HOOK BOLTS:
LEVEL
Warning
MOUNTING STAND:
(a) Install 4 FLOOR PLATES under the BASE or
STAND.
(b) Level the BASE or STAND.
(c) Advance to Step 5.
SCREWS of the PROCESSOR.
SCREWS.
LEVELING SCREWS and through the wall.
See the figure on Page 13.
• 2 HOOK WASHERS
• 4 HOOK NUTS
H172_1019BCA
H172_1019BC
04DEC98 – 7C8771