Section 8: Electrical Setup for the 2000A PROCESSOR
Setting the Power Frequency
Important
This procedure is for the X-Omat 2000A PROCESSOR.
[1] If you are installing an X-Omat 2000 PROCESSOR, advance to Page 22.
[2] Check the frequency of the main power at the site.
Warning
Dangerous Voltage
[3] Move the MAIN POWER SWITCH on the PROCESSOR to the "OFF" position.
[4] Disconnect the main power.
ESD
Possible damage from electrostatic discharge.
7C8771 – 04DEC98
Electrical Setup for the 2000A PROCESSOR
19