Connecting The Plumbing To The Processor - Kodak X-Omat 2000 PROCESSOR Installation Instructions Manual

INSTALLATION INSTRUCTIONS
Section 5: Connecting the Plumbing to the PROCESSOR
Warning
• DRAINS must be made of chemically resistant, non-corrosive material. Use PVC or equivalent.
• The DRAINS must have a minimum diameter of 7.6 cm (3 in.) and be free of obstruction.
• DRAINS service must comply with local codes.
WATER INLET
3 DRAINS
[1] Check that the WEIRS are installed correctly.
⁄
1
[2] Use 1.27 cm ( in.) ID TUBING 760476 to connect the 3 DRAINS to the FLOOR DRAIN.
2
• DEVELOPER
• FIXER
• WASH
[3] Connect the site water supply to the WATER INLET of the PROCESSOR.
16
WASH
FIXER
DEVELOPER
WEIRS
WASH
FIXER
DEVELOPER
H172_0503DCA
H172_0503DC
04DEC98 – 7C8771