Electrical Setup For The 2000 Processor; Setting The Power Frequency And Voltage - Kodak X-Omat 2000 PROCESSOR Installation Instructions Manual

INSTALLATION INSTRUCTIONS
Section 9: Electrical Setup for the 2000 PROCESSOR

Setting the Power Frequency and Voltage

[1] Check the frequency and voltage of the main power at the site.
Warning
Dangerous Voltage
[2] Move the MAIN POWER SWITCH on the PROCESSOR to the "OFF" position.
[3] Disconnect the main power.
ESD
Possible damage from electrostatic discharge.
22 04DEC98 – 7C8771