Installing The Racks - Kodak X-Omat 2000 PROCESSOR Installation Instructions Manual

• RECEIVING BIN

Installing the RACKS

DRIP TRAY
7C8771 – 04DEC98
SPLASH GUARD
H172_1003ACA
H172_1003AC
The RACKS might also be identified with colors:
Setup and Checkout of the PROCESSOR
[1] Wash with warm water:
• DEVELOPER RACK
• FIXER RACK
• WASH RACK
• CROSSOVER ASSEMBLIES
[2] Manually rotate the ROLLERS on all RACKS to
check that the ROLLERS rotate freely.
Caution
• Use the DRIP TRAY and SPLASH GUARD when
installing or removing RACKS.
• Install the RACKS slowly and carefully.
[3] Install the RACKS in the correct TANKS.
Note
The RACKS are identified with letters:
• "D" on the DEVELOPER RACK
• "F" on the FIXER RACK
• "W" on the WASH RACK
• red for the DEVELOPER RACK
• blue for the FIXER RACK
• white for the WASH RACK
[4] Make sure the RACKS are seated correctly.
33