Placing The Processor At The Site; Installing The Processor On An Optional Base Or Stand; Installing The Processor Through A Wall - Kodak X-Omat 2000 PROCESSOR Installation Instructions Manual

Section 4: Placing the PROCESSOR at the Site

Installing the PROCESSOR on an Optional BASE or STAND

PROCESSOR
LEVELING
SCREW
(4)

Installing the PROCESSOR Through a Wall

Use the correct dimensions for the installation of the PROCESSOR with the RECEIVE BIN or the FEED SHELF
through the wall.
7C8771 – 04DEC98
MOUNTING
STAND
H172_0504CCA
H172_0504CC

Placing the PROCESSOR at the Site

Warning
The PROCESSOR weight is 90 kg (200 lb).
[1] Remove the 4 LEVELING SCREWS from the
PROCESSOR.
[2] Install the PROCESSOR on a flat, stable surface
or on a Kodak M35/M43/2000 X-Omat
MOUNTING STAND.
[3] Install the LEVELING SCREWS through the
STAND or flat surface.
11