Filling The Tanks - Kodak X-Omat 2000 PROCESSOR Installation Instructions Manual

INSTALLATION INSTRUCTIONS
Warning
Dangerous Voltage
[4] Connect the PROCESSOR to the main power.
[5] Energize the PROCESSOR.
[6] Allow the PROCESSOR to operate for 5 minutes.
Warning
Dangerous Voltage
[7] De-energize the PROCESSOR.
[8] Check for leakage.
[9] Drain the TANKS.

Filling the TANKS

CAP
O-RING
DEVELOPER
FILTER
FILTER
HOUSING
H172_1026CCA
H172_1026CC
28
[1] Soak the DEVELOPER FILTER in warm water for
30 seconds.
Important
Make sure the O-RING is seated correctly.
[2] Assemble:
• FILTER HOUSING
• DEVELOPER FILTER
• O-RING
• CAP
[3] Install the FILTER HOUSING in the
PROCESSOR.
[4] Check that the TUBING connected to the FILTER
HOUSING is not bent.
04DEC98 – 7C8771