Specifying Ftp/Http Settings - JDS Uniphase HST-3000 User Manual

Chapter 3 Data testing
Specifying test settings
Specifying FTP/
HTTP settings
44
The Trace Route Settings menu appears.
2 Select Address Type, and then select either IP address
or DNS Name (domain name server name).
3 Select IP Address, and then enter the IP address.
4 Select DNS Name, and then enter the DNS name.
5 Select Packet Type, and then set the packet type to one
of the following:
– ICMP (Internet Control Message Protocol)
– UDP (User Datagram Packet)
6 Select DNS Lookup, and then indicate whether you want
to lookup names for hops.
The trace route settings are specified.
The following procedure describes how to specify the FTP/
HTTP (throughput) settings.
To specify FTP/HTTP settings
1 Press the FTP/HTTP soft key. You may need to use the
left or right arrow key to find the FTP/HTTP soft key.
HST-3000 xDSL Testing User's Guide