Specifying Supplementary Services Settings - JDS Uniphase HST-3000 User Manual

Chapter 3 ISDN PRA testing
Specifying test settings
Specifying
Supplementary
Services
settings
60
b If you set Channel to 1x64K (BERT on one channel),
specify the Time Slot value of that channel.
c Select the direction to Monitor for the HIZBERT.
NT->TE is from the CO toward the customer.
TE->NT is from the customer toward the CO.
You are finished specifying BERT settings.
The following procedure describes how to specify the Supple-
mentary Services settings. These settings are not available
when using DASS2 protocol.
To specify the Supplementary Services settings
1 Press the Configure
The test configuration soft keys appear.
2 Press the Supp Service soft key. You may need to use
the left or right arrow button to find the Supp Service soft
key.
The Supp Service Settings menu appears.
HST-3000 E1 Testing User's Guide
navigation key.