Specifying Ftp/Http Settings - JDS Uniphase HST-3000 User Manual

Chapter 2 VDSL Testing
Testing Data services
Specifying FTP/
HTTP settings
48
5 Select Packet Type, and then set the packet type to one
of the following:
– ICMP (Internet Control Message Protocol)
– UDP (User Datagram Packet)
6 Select DNS Lookup, and then indicate whether you want
to lookup names for hops.
The trace route settings are specified.
The following procedure describes how to specify the FTP/
HTTP (throughput) settings.
To specify FTP/HTTP settings
1 Press the FTP/HTTP soft key. You may need to use the
left or right arrow key to find the FTP/HTTP soft key.
The FTP/HTTP Settings menu appears.
2 Press the 1 key, and then enter a User Name. Use the up
and down arrows to indicate a letter or number, or use the
keyboard keys.
3 Press the 2 key, and then enter a Password. Use the up
and down arrows to indicate a letter or number, or use the
keyboard keys.
4 Press the 3 key, and then indicate whether you want to
download or upload.
5 Press the 4 key, and then indicate the Upload File Size.
HST-3000 VDSL Testing User's Guide