Group Summary; Both Summary - JDS Uniphase HST-3000 User Manual

Chapter 4 Interpreting Test Results
Modem emulate results

Group Summary

Both Summary

60
Table 10 describes the group summary results.
Table 10 Summary - Group results
Result
Modem state
Group Rate
Max Group
Rate
Group Capacity
Lapse Time
DSL Interface
Table 11 describes the Summary-Both results.
Table 11 Summary - Both results
Result
Actual rate
Max rate
Capacity
Noise margin
HST-3000 xDSL Testing User's Guide
Description
Shown under the heading, It is the current
operational state for each pair.
Upstream and downstream rates for the
group (combined pairs).
Maximum attainable upstream and down-
stream rates for the group.
The percentage of total bandwidth currently
used by the group's actual connect rate
upstream and downstream.
The time lapse for bonding. This is the time
between pair 1 showtime and pair 2 show-
time.
Which interface is being used for DSL test-
ing: RJ45 or T/R/G.
Description
Actual upstream and downstream rates for
each pair
Maximum attainable upstream and down-
stream rates for each pair
The percentage of total bandwidth currently
used by the actual connect rate upstream
and downstream for each pair
Noise margin upstream and downstream for
each pair