Selecting Modem Emulate Mode; Specifying Test Settings; General Settings - JDS Uniphase HST-3000 User Manual

Selecting
modem emulate
mode
Specifying test
settings
General settings To specify general settings
To select modem emulate mode
1 Access the xDSL Measurement menu (see
2 Select xDSL Modem mode.
After a few seconds the xDSL Summary statistics menu
appears.
The unit is now in modem emulate mode.
Before you begin testing, make sure the settings on the
HST-3000 match the settings of the line you are testing.
1 Press the Configure
The parameter soft keys appear.
2 Press the GENERAL soft key.
The xDSL General Settings menu appears.
3 Select Technology, and then select VDSL, ADSL, or
xDSL (Auto). The Auto setting queries the DSLAM for the
technology.
4 If you selected ADSL as the Technology, select Standard
and then specify the ADSL standard.
HST-3000 xDSL Testing User's Guide
Chapter 2 DSL Testing
Testing in single-line modem emulate mode
navigation key.
page 12).
13