Band Statistics; Bonded Dsl Band Statistics; Identity Results; Event Log - JDS Uniphase HST-3000 User Manual

Band statistics

Bonded DSL

Band statistics

Identity results

Event log

This category only appears for VDSL lines. It provides line
attenuation, signal attenuation, SNR margin, and TX power
per band.
For bonded VDSL, the same results are shown, but the
bonded results are separated into different screens:
– Both - separate results for each pair, shown on the same
screen
– Pair 1 or Pair 2 - Same results as the non-bonded screen,
except the title.
This category provides the HST-3000 modem firmware revi-
sion information (includes the PHY and the driver version).
In Bonded VDSL mode, additional results are available:
– VDSL version
– Remote Vendor Name
– Status of each pair. This includes whether the pair is
capable of bonding as well as whether the pairs are
bonded.
This category provides a running log of significant modem
events and errors for the line.
In bonded mode, the event log is split into different screens –
one for each pair.
HST-3000 xDSL Testing User's Guide
Chapter 4 Interpreting Test Results
Modem emulate results
67