Releasing Ip Addresses - JDS Uniphase HST-3000 User Manual

Releasing IP addresses

3 Select a ping method:
– Ping Once sends a single ping to the network.
– Start Ping consecutively sends multiple pings to the
network, up to the number of pings configured.
4 Press the Results soft key to clear the results or save
them to a text file.
For more information on saving results and managing the
files, see the HST-3000 Base Unit User's Guide.
The ping test is complete.
The HST allows you to release allocated IP addresses, so
they can be used by other equipment. The IP release feature
is available when the data mode is set to one of the following:
– IP over Ethernet (IPoE)
– PPP over Ethernet (PPPoE)
For instructions Specifying the data mode, see
data settings" on page
The following procedure describes how to release IP
addresses.
To release IP addresses
1 Press the Home navigation key.
2 Connect the HST to the line. See
on page 46.
3 Press the Display soft key.
4 Press the 4 key to select IP Results.
The IP results window appears.
5 Press the Actions soft key.
HST-3000 xDSL Testing User's Guide
33.
"Connecting to the line"
Chapter 3 Data testing

Releasing IP addresses

"Specifying
49