Dsl Summary Results - JDS Uniphase HST-3000 User Manual

DSL Summary
results
Table 9 Summary results
Result
Data mode
Vector Mode
Technology
This category provides a summary of the most important test
results. This default results screen, shown in
provides a summary of the most frequently used test results.
Figure 2 Summary results screen (single-line)
NOTE:
This screen shows actual results and full synchronization. If
you are not connected to the line, or have not reached "Show
Time", the data flow (the "0" and "1" line) will not appear and
any results displayed will reflect the previous test.
Table 9 describes the summary results.
Description
Shown in the upper right
of the screen. It is the
current data mode.
Shown in the upper right
of the screen, under the
Data mode. It is the
mode selected for Vec-
toring.
Shown under the Data
Mode. It is the current
technology.
HST-3000 xDSL Testing User's Guide
Chapter 4 Interpreting Test Results
Modem emulate results
Range
IPoE, PPPoE,
Bridged Ethernet
V-Fl (Full),
V-Fr (Friendly),
V-off (Off)
ADSL, VDSL2, or
xDSL
Figure 2,
Resolution
N/A
N/A
N/A
57